Letter “A” Polymer Clay Alphabet Cane Tutorial
This free tutorial is part of a series on creating polymer clay alphabet canes and shows how to create all 26 capital letters of the English alphabet. (The whole series used to be on my other site, KayVincent.com, but I’m migrating all of my polymer clay-related resources here onto this PolymerKay.com website instead.)
Click here for more resources on creating different types of letter canes, but in the meantime the “Letter A polymer clay alphabet cane” tutorial is below, and here is a sneak preview of the 1-minute TikTok tutorial:
You will need:
- Approximately 14g white clay (i.e. about a quarter of a standard-sized block of clay)
- Approx. 8g black clay (one eighth of a block)
- Tissue blade or clay slicer
- Pasta machine or clay roller (here is an article about how to choose a pasta machine)
Instructions
Step 0) Condition the clay
1) Roll the black clay into a sheet approx 1.5mm thick (usually one of the middle settings of the pasta machine):
2) Cut off around a quarter of the white clay and save that piece for later:
3) Roll the white clay into a cylinder approx 2.5cm (1 inch) in diameter:
4) Using the white cylinder from Step 3 above, cut it into a wedge shape (making sure that both cuts start from the same point at the top of the circle):
5) Using the black sheet of clay from Step 1, cover the two flat sides of the wedge with a layer of black clay. Then trim off any excess black:
6) Make a horizontal cut across the middle of the wedge shape:
7) Insert one layer of black clay between the two pieces of the wedge. Trim off any excess black:
8) Reassemble the pieces of the cane:
9) Take the piece of white clay from Step 2 and roll it through the pasta machine on the thickest setting, then wrap it around the outside of the cane:
10) Reduce the cane.
Finished letter:
…and here is a handy graphic which shows everything on one page. (Feel free to pin/save it via the Pinterest button on this page):
I hope you found this tutorial useful – if so, you can support the blog by sharing it on social media or linking to it from your own website. Or maybe you’d consider contributing to my clay fund via the Ko-fi button, so I can keep creating these tutorials? If you’d like to receive the tutorials and other content as emails, please sign up for the newsletter.